Last Modified: 11-29-2007 1.6 A
Service Category: Vehicle Interior Section: Heating/Air Conditioning
Model Year: 2008 Model: Sequoia Doc ID: RM000001801019X
Title: HEATING / AIR CONDITIONING: COMPRESSOR (for 3UR-FE): REMOVAL (2008 Sequoia)

REMOVAL

1. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM HEATING / AIR CONDITIONING: REFRIGERANT: REPLACEMENT (2008 Sequoia)+

2. REMOVE FAN AND GENERATOR V BELT

(a) Remove the fan and generator V belt 3UR-FE ENGINE MECHANICAL: DRIVE BELT: REMOVAL (2008 Sequoia) .

3. REMOVE FENDER APRON MUDGUARD SEAL LH



(a) Remove the 6 clips and seal.

4. DISCONNECT NO. 1 COOLER REFRIGERANT SUCTION HOSE

(a) Remove the bolt and disconnect the cooler refrigerant suction hose from the cooler compressor.

(b) Remove the O-ring from the cooler refrigerant suction hose.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

5. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE

(a) Remove the bolt and disconnect the cooler refrigerant discharge hose from the cooler compressor.

(b) Remove the O-ring from the cooler refrigerant discharge hose.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

6. REMOVE COOLER COMPRESSOR ASSEMBLY

(a) Disconnect the connector.

(b) Remove the 2 bolts and 2 nuts.

(c) Remove the 2 stud bolts and cooler compressor.